top of page
High Pressure Guns
POLISPRAY-3 / High pressure gun
POLISPRAY 3 is a gun designed and recommended for applying liquid abrasive paste, used in polishing processes. Efficiently replaces WIDO-SPRAY type guns.
POLISPRAY-3 accurately injects up to 6 cm³ of liquid abrasive or lubricating grease and is equipped with a quick-change head (OW-HEAD) that does not need to be removed to purge air from the gun.
All of its parts and components are manufactured to high quality standards and with optimized materials to obtain maximum performance and reduce factors that cause wear.
These parts and components are compatible and interchangeable with Wido-spray type guns.
Main advantages obtained with POLISPRAY 3 pistols:
• Saves around 25% in liquid polishing mass, compared to other types of guns available on the market;
• Minimum compressed air consumption;
• Controlled application of paste that allows perfect penetration into the polishing discs and wheels, with more consistent finishing results;
• Injection control. The spray volume can be regulated between 2 and 6 Cm3;
• Always clean work area. The POLISPRAY 3 gun does not release mass into the environment;
• High mass injection speed, which neutralizes the turbulence created by high-speed polishing discs;
• Use of high quality materials that increase the useful life of components subject to wear;
• Does not require high pressure pumping systems;
• Suitable for use with electronic controls.
Technical Data
Weight 1700 gr
G 1/8" air connector
Hose G 3/8" Sleeve NW 13
Fixing hole ø 12 mm
Dosage volume 0.5 - 6 cmł
Air pressure 5 - 6 bar
Mass pressure min. 5 bar
POLISPRAY-3 accurately injects up to 6 cm³ of liquid abrasive or lubricating grease and is equipped with a quick-change head (OW-HEAD) that does not need to be removed to purge air from the gun.
All of its parts and components are manufactured to high quality standards and with optimized materials to obtain maximum performance and reduce factors that cause wear.
These parts and components are compatible and interchangeable with Wido-spray type guns.
Main advantages obtained with POLISPRAY 3 pistols:
• Saves around 25% in liquid polishing mass, compared to other types of guns available on the market;
• Minimum compressed air consumption;
• Controlled application of paste that allows perfect penetration into the polishing discs and wheels, with more consistent finishing results;
• Injection control. The spray volume can be regulated between 2 and 6 Cm3;
• Always clean work area. The POLISPRAY 3 gun does not release mass into the environment;
• High mass injection speed, which neutralizes the turbulence created by high-speed polishing discs;
• Use of high quality materials that increase the useful life of components subject to wear;
• Does not require high pressure pumping systems;
• Suitable for use with electronic controls.
Technical Data
Weight 1700 gr
G 1/8" air connector
Hose G 3/8" Sleeve NW 13
Fixing hole ø 12 mm
Dosage volume 0.5 - 6 cmł
Air pressure 5 - 6 bar
Mass pressure min. 5 bar
POLISPRAY-3 / Spare Parts
Pos. | Code | Description
9 | 230090 | Cup seal
10 | 230100 | Sealing cup
11 | 230110 | Adapter
12 | 230120 | Threaded bush incl. Nut
13 | 230130 | Stop cock
14 | 230140 | Sealing ring 3/8"
15 | 230150 | hose connection
17 | 230170 | Comp. Check valve
18 | 230180 | Grooved pin
19 | 230190 | O-Ring
20 | 230200 | Flat seal
21 | 230210 | Spindle
22 | 230220 | O-Ring
23 | 230230 | Cylinder cover
24 | 230240 | O-Ring
25 | 230250 | Retaining Nut
26 | 230260 | Knurled knob
27 | 230270 | Flat head screw
28 | 230280 | Body with opening for control sensor
30 | 230300 | Inspection plug
31 | 230310 | Bush
32 | 230320 | Cylinder flange
33 | 230330 | Retaining ring
34 | 230340 | fastening screw
35 | 230350 | Cylinder
36 | 230360 | Plunger
37 | 230370 | compression spring
38 | 230380 | piston assembly
94 | 230440 | Air-Connection 1/8"-8/6
44 | 700550 | OW-Head
45 | 230600 | Adapter
1 | 900xxx | Nozzles
9 | 230090 | Cup seal
10 | 230100 | Sealing cup
11 | 230110 | Adapter
12 | 230120 | Threaded bush incl. Nut
13 | 230130 | Stop cock
14 | 230140 | Sealing ring 3/8"
15 | 230150 | hose connection
17 | 230170 | Comp. Check valve
18 | 230180 | Grooved pin
19 | 230190 | O-Ring
20 | 230200 | Flat seal
21 | 230210 | Spindle
22 | 230220 | O-Ring
23 | 230230 | Cylinder cover
24 | 230240 | O-Ring
25 | 230250 | Retaining Nut
26 | 230260 | Knurled knob
27 | 230270 | Flat head screw
28 | 230280 | Body with opening for control sensor
30 | 230300 | Inspection plug
31 | 230310 | Bush
32 | 230320 | Cylinder flange
33 | 230330 | Retaining ring
34 | 230340 | fastening screw
35 | 230350 | Cylinder
36 | 230360 | Plunger
37 | 230370 | compression spring
38 | 230380 | piston assembly
94 | 230440 | Air-Connection 1/8"-8/6
44 | 700550 | OW-Head
45 | 230600 | Adapter
1 | 900xxx | Nozzles
MARATHON-12 OW / High pressure gun
The Marathon model is a high-pressure dosing gun, designed for applying liquid abrasive paste for polishing in automatic machines.
The Marathon is robust and simple to use and works reliably over a long period of time.
Project Details:
• High exit speed to overcome turbulence created by rapidly rotating discs.
• Accurate measurement due to fast-acting outlet valve
• Simplified maintenance with interchangeable spray head
• Quick and easy spray nozzle replacement
• Simple air bleeding
• Optional external spray head with flexible extensions
• Ready to use with electronic control
Technical Data
• Control: 3/2-way valve (G1/4)
• Air pressure: 4 - 6 bar
• G 1/4" air hose – 8/6 mm hose
• Material pressure 4 - 6 bar
• 13 mm material hose
• Amount of spray per shot
Marathon 12 OW 1.2 – 4.0 cm³
The Marathon is robust and simple to use and works reliably over a long period of time.
Project Details:
• High exit speed to overcome turbulence created by rapidly rotating discs.
• Accurate measurement due to fast-acting outlet valve
• Simplified maintenance with interchangeable spray head
• Quick and easy spray nozzle replacement
• Simple air bleeding
• Optional external spray head with flexible extensions
• Ready to use with electronic control
Technical Data
• Control: 3/2-way valve (G1/4)
• Air pressure: 4 - 6 bar
• G 1/4" air hose – 8/6 mm hose
• Material pressure 4 - 6 bar
• 13 mm material hose
• Amount of spray per shot
Marathon 12 OW 1.2 – 4.0 cm³
MARATHON-12 OW / Spare Parts
Pos. Part no. Item
14 700140 Retaining Plate
15 700150 Sleeve
16 700160 O-Ring
17 700170 Cup Seal
18 700180 Body without hole
18 700181 Body with 1/4"
19 700190 Plunger
20 700200 Compression Spring
22 700220 Pneumatic Piston
24 700240 Screw
25 700250 Cylinder Tube
26 700260 O-Ring
27 700275 Air Connection
29 700290 Gasket
31 700310 O-Ring
32 700320 Dosing Screw
34 700340 Check Valve
35 700350 Angle
36 700360 Gasket
37 700370 Stop Valve
38 700380 Hose Connection
39 700390 Cylinder Screw
40 700400 Plate
42 700420 Cylinder Bottom
55 700550 OW-Head compl.
61 700610 Adapter for Marathon
14 700140 Retaining Plate
15 700150 Sleeve
16 700160 O-Ring
17 700170 Cup Seal
18 700180 Body without hole
18 700181 Body with 1/4"
19 700190 Plunger
20 700200 Compression Spring
22 700220 Pneumatic Piston
24 700240 Screw
25 700250 Cylinder Tube
26 700260 O-Ring
27 700275 Air Connection
29 700290 Gasket
31 700310 O-Ring
32 700320 Dosing Screw
34 700340 Check Valve
35 700350 Angle
36 700360 Gasket
37 700370 Stop Valve
38 700380 Hose Connection
39 700390 Cylinder Screw
40 700400 Plate
42 700420 Cylinder Bottom
55 700550 OW-Head compl.
61 700610 Adapter for Marathon
Spare parts for high pressure spray guns
We offer a comprehensive after-sales service that includes the supply of stock and nationalized spare parts, such as
• OW spray head (sealed)
• Detachable OW spray head
• Injector nozzles of all types and in all sizes and spray angles
• Compression spring
• Ceramic piston
• Retention valve
• Flat seal, body O'ring, gaskets, etc.
• OW spray head (sealed)
• Detachable OW spray head
• Injector nozzles of all types and in all sizes and spray angles
• Compression spring
• Ceramic piston
• Retention valve
• Flat seal, body O'ring, gaskets, etc.
Spray diagram Distance <-> Nozzle-Disc
Diagram of distances from nozzle to disc
Example with 115mm spray width
*40° nozzle > distance 170mm (approx)
*65° nozzle > distance 100mm (approx)
*90° nozzle > distance 65mm (approx)
Example with 115mm spray width
*40° nozzle > distance 170mm (approx)
*65° nozzle > distance 100mm (approx)
*90° nozzle > distance 65mm (approx)
Overview of products for injecting polishing compounds
We offer a comprehensive range of products:
High pressure spray systems
• PoliSpray 3
• Marathon
• OW spray head
Low pressure guns
• CS 20
• Soft Spray
Bombs
• HKP 225
• PM 100
Solid paste distributor
• SCF 100
High pressure spray systems
• PoliSpray 3
• Marathon
• OW spray head
Low pressure guns
• CS 20
• Soft Spray
Bombs
• HKP 225
• PM 100
Solid paste distributor
• SCF 100
Quick change OW spray head
Quick change head (OW).
Efficiently replaces multiple parts
High wear, simplifying the maintenance process.
The head (OW) is quickly and manually threaded onto the gun body. Adapters are available for use on pistols, type WIDO-SPRAY and type HDP.
The OW Head is completely sealed, and avoids frequent replacement of the following parts:
.Nozzle nut : 230 010
.Teflon seal : 230 020
.Retaining nut : 230 030
.Valve seat : 230 040
.Sealing ring : 230 050
.Valve piston : 230 060
This means a huge saving of time, avoiding machine stops to maintain the gun(s).
* We also supply ** Spray nozzles, of all types and in all sizes and spray angles
**Made in Germany with high quality materials that are very resistant to wear and tear
Efficiently replaces multiple parts
High wear, simplifying the maintenance process.
The head (OW) is quickly and manually threaded onto the gun body. Adapters are available for use on pistols, type WIDO-SPRAY and type HDP.
The OW Head is completely sealed, and avoids frequent replacement of the following parts:
.Nozzle nut : 230 010
.Teflon seal : 230 020
.Retaining nut : 230 030
.Valve seat : 230 040
.Sealing ring : 230 050
.Valve piston : 230 060
This means a huge saving of time, avoiding machine stops to maintain the gun(s).
* We also supply ** Spray nozzles, of all types and in all sizes and spray angles
**Made in Germany with high quality materials that are very resistant to wear and tear
Comparison of the OW sprayer with other sprayers
Quick change head (OW).
Efficiently replaces multiple parts
High wear, simplifying the maintenance process.
The head (OW) is quickly and manually threaded onto the gun body. Adapters are available for use on pistols, type WIDO-SPRAY and type HDP.
The OW Head is completely sealed, and avoids frequent replacement of the following parts:
.Nozzle nut : 230 010
.Teflon seal : 230 020
.Retaining nut : 230 030
.Valve seat : 230 040
.Sealing ring : 230 050
.Valve piston : 230 060
This means a huge saving of time, avoiding machine stops to maintain the gun(s).
Efficiently replaces multiple parts
High wear, simplifying the maintenance process.
The head (OW) is quickly and manually threaded onto the gun body. Adapters are available for use on pistols, type WIDO-SPRAY and type HDP.
The OW Head is completely sealed, and avoids frequent replacement of the following parts:
.Nozzle nut : 230 010
.Teflon seal : 230 020
.Retaining nut : 230 030
.Valve seat : 230 040
.Sealing ring : 230 050
.Valve piston : 230 060
This means a huge saving of time, avoiding machine stops to maintain the gun(s).
bottom of page